Topic: Audigy 2zs audio inputs

Viewing 5 posts - 1 through 5 (of 5 total)
  • February 20, 2006 at 09:46 #738
    francois
    Participant

    Hi Frits , do you know this sound card? My problem is to record from other sources than Mic.When i select another source , like Aux , or line , it does not record anything.It works with their recorder , but in a sequencer , nothing.So , its useless to have all these inputs appearing in the “Active channel”.It Shows 16 inputs , but only two are usable.
    🙁
    Thanks for help
    Francois

    February 20, 2006 at 23:47 #6151
    Zynewave
    Keymaster

    Hi Francois,

    When i select another source , like Aux , or line , it does not record anything

    Do you mean you select another input object in Podium, or are you talking about buttons on the interface?

    Could you please post/email an interface report. You create that on the report page in the MIDI/Audio Interfaces setup dialog.

    Frits

    February 21, 2006 at 10:29 #6156
    francois
    Participant

    Hi frits , in fact the input that appear in Podium and i would like to map to tracks are Line 2 and Aux 2 , this i cant do because i dont have the extension Platinium.But Why the Line 1 and Aux 1 does not appear?

    February 21, 2006 at 14:35 #6158
    Zynewave
    Keymaster

    You’re right, there seems to be missing some inputs. From the report you emailed me, there should be 22 enabled input channels, but your screenshot with the input mappings only show 4 stereo/8 mono inputs. Maybe you created the input mappings at a time where you did not have all 22 input channels enabled?

    Try creating a new project and use the quick setup command in the wizard. Does this produce more input mappings?

    February 22, 2006 at 01:41 #6164
    francois
    Participant

    I did that yesterday ,yes there are more input appearing because before i disable all that seems useless for me , but my Line 1 and aux 1 dont appear.I’ll do it again this afternoon.It does not seems to be specially related to podium , because i have the same problem with sonar.I’ll check in Wavelab.What i dont understand is why these inputs are available , for the Creative Mixer application and not for other application.I tried also use the WDM drivers , then i only have 2 inputs and 2 outputs in Podium.If you have more ideas , you’re welcome 🙂
    Thanks for your help

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.
© 2021 Zynewave