Topic: Bounc clic

Viewing 4 posts - 1 through 4 (of 4 total)
  • August 20, 2007 at 11:36 #1386
    RPcompo
    Participant

    Help,

    when i’m doing a bounc, the result “clic”, like a chopper effect (on/off of the sound)
    I don’t enderstand why….
    There is maybe too much effetcs & tracks, but it can be read without this effect. And if i’m reducing then number of effect & track, there is always the probleme.
    (And: I’m trining to do a new project, with just 1 track, it’s work… And the project with a lot of track (bounc=clic) reduced to 1 track clic too…)

    Please help, the only solution i have is to record the audio output inside Podium (Digital–> Analog–> Digital = not good…but it works)

    Thanks

    Raphael

    (PS, soory for bad English…)

    August 20, 2007 at 11:55 #10629
    Zynewave
    Keymaster

    Does the clicking occur during normal playback?

    Are you doing a bounce render (ctrl+B) or realtime bounce recording?

    Some plugins have a problem with processing faster than realtime, and so need to be bounce recorded realtime. Realtime bounce recording is done by enabling both the B and R buttons on the bounce track, enabling record mode and then pressing play.

    August 20, 2007 at 12:03 #10630
    RPcompo
    Participant

    No, there’s no clic during normal playback, only in the bounc file.
    For the bounc, in fact, i’m doing like in the manual…
    But i don’t try the Realtime Bounc.
    I’m trying it and send you the result tomorrow.

    Thanks

    Raphael

    August 21, 2007 at 08:20 #10631
    RPcompo
    Participant

    OK !!! It works !!!
    Thank’s a lot. The existence of 2 type of bounce was not clear for me.

    Now, I can say that Podium is THE soft I need, completly.
    😀

    Raphael

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
© 2021 Zynewave