Topic: hålp

Viewing 5 posts - 1 through 5 (of 5 total)
  • September 22, 2009 at 16:07 #2049
    Markus
    Participant

    So.. Looks like my limiter doesnt affect on selected track, it will affect on master track. Check screenshots.

    Before

    And after

    Is this BUG, or what? Thanks..

    September 22, 2009 at 23:45 #16428
    druid
    Participant

    Right click on the mixer “track” (Battery 3) and then go to “Meter” and see which it is selected. If it is metering only “Battery 3”, then any FX after this will not show. If you select in that the last FX in the chain, then the meter will use them all.

    Let us know if that fixes your issue.

    Also, don’t forget you can set the fader this way too, allowing you to choose how far in the chain you want the fader to affect volume!

    September 23, 2009 at 01:46 #16429
    Markus
    Participant

    @druid wrote:

    Right click on the mixer “track” (Battery 3) and then go to “Meter” and see which it is selected. If it is metering only “Battery 3”, then any FX after this will not show. If you select in that the last FX in the chain, then the meter will use them all.

    Let us know if that fixes your issue.

    Also, don’t forget you can set the fader this way too, allowing you to choose how far in the chain you want the fader to affect volume!

    Ye thanks. That fix it. Strange, i haven’t touch it at all. Default settings..

    September 23, 2009 at 04:45 #16436
    thcilnnahoj
    Participant

    Usually the mixing grid (Mixer menu > Controls > Fader & Meter Grids) should be visible in the default setup. With it, you won’t have to go through the right-click menus to set these things up.

    September 23, 2009 at 14:38 #16442
    druid
    Participant

    Strange, when I tested, by default it metered the FX I added, if I recall correctly…

    Well, never mind. As thcilnnahoj said, if the mixing grid is on, you can just click the square appropriate anyway, without having to go through menus.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.