Topic: Rewire Issues

Viewing 10 posts - 1 through 10 (of 10 total)
  • July 6, 2010 at 09:17 #2296
    khaos
    Participant

    Hi,

    I’m trying to rewire reason 4 into Podium, basically I add a rewire track on Reason channel 3, load a Thor on channel 3. All looks fine, I can play sounds via Thor and it shows up in Podium, my problem is that the track it is assigned to in Podium seems to be an Audio track rather than a Midi track.

    Am I doing something wrong?

    Cheers
    Matt

    July 6, 2010 at 09:33 #18739
    Trancit
    Participant

    To use midi for Reason, you have to create a second track…

    under “Source” or in the device panel of the inspector there is a midi subfolder under the Reason audio outputs, where you can find all devices, which your actual Reason instance has loaded…

    Choose your Thor instance from there and your done…

    Don´t know, if there is another way, but this works for me…

    Trancit

    July 6, 2010 at 12:05 #18742
    khaos
    Participant

    Hmm, for some reason it’s not working for me.

    Any chance you can post up a project thats got rewire running? I could then see if I’m doing anything differently.

    Matt

    July 6, 2010 at 15:00 #18744
    Trancit
    Participant

    @khaos wrote:

    Hmm, for some reason it’s not working for me.

    Any chance you can post up a project thats got rewire running? I could then see if I’m doing anything differently.

    Matt

    Check PM

    Trancit

    July 6, 2010 at 16:53 #18745
    khaos
    Participant

    I think I may have it working.

    For ever Reason Device I want to use I need to make 2 tracks in Podium. First one to receive the audio from reason, the 2nd to input midi into reason.

    Is there a way to group these tracks? Or another way to do it using 1 track?

    July 6, 2010 at 16:54 #18746
    khaos
    Participant

    Another update: Grouping the tracks works, but there is a red error/warning message in the source box; though it seems to work anyway.

    July 10, 2010 at 03:42 #18767
    khaos
    Participant

    Trancit the track you sent me wouldnt open, said it was made with a differnent version. I’m using 2.32.

    Zynewave is it correct that for each rewire/reason instrument I want to use I need to create 2 tracks?

    July 10, 2010 at 09:16 #18770
    Zynewave
    Keymaster

    @khaos wrote:

    Trancit the track you sent me wouldnt open, said it was made with a differnent version. I’m using 2.32.

    Unless the file was saved with 2.33, the message you get just informs you that the file was saved with an older version. If you resave the file, then the pod file will not load in that older version. The project should still load fine.

    Zynewave is it correct that for each rewire/reason instrument I want to use I need to create 2 tracks?

    It’s been a while since I last tried Reason, but if you want to use the Reason mixer, I believe it is enough to just set up the Reason master mix l/r mapping on one track in Podium. Then add all the Reason MIDI tracks you need in Podium. You would only need to use multiple Reason outputs if you want to mix or apply effects to each Reason synth in the Podium mixer.

    July 10, 2010 at 21:33 #18790
    Trancit
    Participant

    @Zynewave wrote:

    @khaos wrote:

    Unless the file was saved with 2.33, the message you get just informs you that the file was saved with an older version. If you resave the file, then the pod file will not load in that older version. The project should still load fine.

    The project was saved with 2.33

    Zynewave is it correct that for each rewire/reason instrument I want to use I need to create 2 tracks?

    It’s been a while since I last tried Reason, but if you want to use the Reason mixer, I believe it is enough to just set up the Reason master mix l/r mapping on one track in Podium. Then add all the Reason MIDI tracks you need in Podium. You would only need to use multiple Reason outputs if you want to mix or apply effects to each Reason synth in the Podium mixer.

    If you want to use Podium to mix the individual outputs of Reason, you have indeed to use min. 2 channels per Reason “Instrument”
    One to host the midi data to Reason and second for the audio data from Reason and perhaps a third one…
    In the Reason standard mapping, only the Mix L/R is a stereo output…3 to 64 are mono outputs…I don´t have Reason installed, so I don´t know, if you can change this mapping in Podium to combine to mono Outputs in one stereo…but I guess, you can do so…

    Trancit

    July 11, 2010 at 02:56 #18795
    khaos
    Participant

    Thanks everyone for the replies, greatly appreciated.

    I’ve got it working perfectly now.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.