Topic: 2.04 « Zynewave

This topic has 16 replies, 9 voices, and was last updated 16 years, 3 months ago by Zynewave.

Viewing 15 posts - 1 through 15 (of 17 total)

1 2 →

August 9, 2008 at 22:53 #1670
Zynewave
Keymaster
- The mixer can now show RMS meters with K-System scales. The arrangement properties dialog has two new settings that control the RMS meter behaviour: “RMS meter scale” has options for K-12, K-14 or K-20. “RMS meter window” defines the response of the RMS meters.
- Each track can be configured to show peak and/or RMS meter. Clicking the meter on any mixer strip will toggle RMS on/off. The meter options can also be set with the new “Meter” submenu, or with the “Peak meter” and “RMS meter” options in the track properties dialog.
- Setting up pre/post faders and meters is now easily done with the new “Fader” and “Meter” submenus in the track menu. It is possible to set the fader and meter to any effect in the chain. The submenus also has commands for enabling gain, pan, peak meter and RMS meter options.
- The mixer has a new optional grid control shown at the bottom of each strip. Each row of blocks in a grid represents an effect in the track effect chain. The first column of blocks represents fader position and the second column represents meter position. Highlighted blocks indicates where the fader and meter is currently positioned. Bus sends are drawn as framed blocks instead of filled blocks. Placing the mouse over a grid will show a popup with detailed information. Clicking the grid will toggle the meter between pre and post effect chain. Shift-clicking a block in the grid will set the fader or meter to the corresponding effect track.
- Peak hold values are shown below meters in the mixer. Clicking the peak hold value box will reset the value. Double-clicking any peak hold value box will reset the value for all mixer strips.
- Added “use small font”, “show pan fader instead of pan dial”, “show send dial on separate line” and “show hierarchy/signal flow arrows” options to the mixer region properties.
- Added “Bypass” and “Editor” options to the column of mixer control buttons. Deselecting either of these will hide the buttons from the track headers and instead indicate bypass and editor state with a colored frame drawn around the device controls.
- Added mouse action settings to the mixer region properties dialog. Actions can be specified for click, shift+click, ctrl+click, alt+click, middle-click, right-click and double-click.
- Changed the design of the mixer headers. The track name is now written at the top of the strip and not on the header.
- Updated the mixer popup-help texts.
- Added “automatic solo” track option. Tracks that have this option enabled will be soloed automatically when solo is activated on other tracks. The mode can be toggled by Shift+Alt+Clicking solo buttons or by pressing Shift+Alt+S. When creating a new arrangement the bus return group track will be set to automatic solo mode.
- Added “Solo”, “Automatic Solo”, “Mute”, “Record” and “Bounce” options to the properties submenu of the track context menu.
- Inserting effects on a track now defaults to being pre-fader instead of post-fader.
- The automatic assignment of audio input and instrument plugin mappings on the first two tracks is now optional in the “new arrangement” dialog.
- MIDI System Exclusive files (.syx) can be dragged onto tracks.
- Fix: Creating subfolders in the project template folder would mess up the Project menu.
August 9, 2008 at 23:31 #12999

sam c
Participant

Thanks Frits! Loading it now………

August 10, 2008 at 00:17 #13001

rogerkl
Participant

Thanks,
this is very nice.
The pre/post fader feature saves me a lot of work, disabling
gain and pan on a track and enable it at the last effect,
which I had to do a lot on a couple of mixes I’m working on
right now.
So thumbs up, very nice, keep up the good work.

Roger

August 10, 2008 at 11:15 #13002

swindus
Participant

Stunning release. Thanks!

August 10, 2008 at 22:17 #13007

sam c
Participant

Frits, this is a fantastic upgrade……….great, great work!

August 11, 2008 at 09:09 #13008

rinxai
Participant

Yet another excellent update. Thanks! 😀

August 11, 2008 at 10:59 #13009

BioEncoder
Participant

Perfekt Fritz! Thanks!

August 13, 2008 at 10:27 #13010

swindus
Participant

While working with Podium I noticed a small GUI error. There are empty menu items in the view menu of both (windowed and embedded) sequence editors. Selecting one of the items results in an empty window.

PS: The workflow of Podium 2.04 is really great now!

August 13, 2008 at 10:33 #13011

Zynewave
Keymaster

@swindus wrote:

While working with Podium I noticed a small GUI error. There are empty menu items in the view menu of both (windowed and embedded) sequence editors. Selecting one of the items results in an empty window.

Please check the “Editor Profiles…” dialog from the setup menu. I suspect the list of profiles includes some empty/blank editor profiles. If you think it is a bug in Podium, please email the Podium.ini file.

August 13, 2008 at 10:40 #13012

swindus
Participant

You are right. Deleted them and the empty menu items are gone.

August 14, 2008 at 02:24 #13013

H-man
Participant

@swindus wrote:

Stunning release. Thanks!

Yes, have to agree. Brilliant update Frits!

Ben

August 20, 2008 at 10:52 #13034

Conquistador
Participant

Cheers Frits. Top draw. 🙂

August 20, 2008 at 15:28 #13041

swindus
Participant

Found a little GUI bug. There is something wrong with the peak indicator of the master track in the mixer when resizing the mixer region.

August 27, 2008 at 19:37 #13094

Zynewave
Keymaster

@swindus wrote:

Found a little GUI bug. There is something wrong with the peak indicator of the master track in the mixer when resizing the mixer region.

Thanks.

I think the best way to fix this overlap is to hide the peak hold indicators when the strips are sized below a certain height. Agreed?

August 27, 2008 at 20:31 #13095

swindus
Participant

Yes, sure.