Topic: Hardware controller for Podium

Viewing 9 posts - 1 through 9 (of 9 total)
  • July 27, 2011 at 19:07 #2604
    michi_mak
    Participant

    is anybody running a hardware controller with Podium ( focusing on controlling the mixer )?
    if yes, which one and would you recommend it?

    July 28, 2011 at 23:00 #20847
    Zynewave
    Keymaster

    For controlling the mixer, Podium currently only supports the Mackie MCU and other devices capable of emulating MCU.

    July 29, 2011 at 04:46 #20848
    michi_mak
    Participant

    Thanks for joning Frits, i read about the MCU ( only ) support -this was ment to be a call for users sharing their experience – Behringer BCF supports MCU and so does the Korg NanoKontrol2 – does anybody use any of these 2?

    September 15, 2011 at 06:06 #21020
    michi_mak
    Participant

    @Zynewave wrote:

    For controlling the mixer, Podium currently only supports the Mackie MCU and other devices capable of emulating MCU.

    not entirely true …

    NanoKontrol2 is NOT supported

    September 15, 2011 at 11:30 #21021
    tayfun
    Participant

    http://www.youtube.com/watch?v=-qNk5bCxspY

    in this video we can use nanokontrol2 with Reaper. Can we use nanokontrol2 with Podium. Thank you.

    September 15, 2011 at 11:47 #21022
    michi_mak
    Participant

    i didn’t find a way to use NanoKontrol2 with Podium – according to Frits there is one feature tiny missing in Podium but he was not sure if he could add it …

    September 15, 2011 at 22:00 #21023
    Zynewave
    Keymaster

    @michi_mak wrote:

    i didn’t find a way to use NanoKontrol2 with Podium – according to Frits there is one feature tiny missing in Podium but he was not sure if he could add it …

    I’m currently doing some experiments with enhanced MIDI remote control. Too early to say if this can be implemented for the next release.

    September 16, 2011 at 10:51 #21028
    tayfun
    Participant

    i posted a comment to the video’s owner.

    i wrote

    “can you test nanokontrol2 with the Zynewave Podium Free DAw program?

    I’am waiting your answer thank you.”

    and he answered :

    -be honest i don’t really want to try it out because i don’t want the program you mentioned to screw with all the other programs that i have in my comp, but if that program uses Midi CC messages, the NanoKontrol 2 should work with it, cause it uses Midi CC message code to work with your daw. But be warned, you will have to program the ccm manually into thenanokontrol2 and your daw so it can communicate back and forth and set midi preferences for the Nano to work.

    so can we use nanokontrol2 with Podium?

    September 16, 2011 at 11:39 #21029
    michi_mak
    Participant

    short answer : NO

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.
© 2021 Zynewave